Instruments Tutorial for iOS: How To Debug Memory Leaks

An Xcode and Instruments Tutorial that shows you how you can debug memory leaks in your iPhone apps. By Ray Wenderlich.

Leave a rating/review
Save for later
Share

Call the plumber, it's-a-leaking!

Call the plumber, it's-a-leaking!

Update 4/12/13: These days, you should probably be using Apple’s new Automatic Reference Counting (ARC) technology instead of doing manual memory management. For more details on ARC, check out our ARC tutorial. We also have an updated Instruments tutorial you might want to check out.

This is the second article in a three-part series on working with memory in Objective-C on the iPhone. In the first part of the series, we covered how to manage memory in Objective-C by using instance variables and reference counting.

No matter how well you understand memory management in Objective-C, from time to time you’re bound to make mistakes. But often there’s way too much code to search line-by-line for problems (unless you want your hair to turn gray!)

Luckily, Apple has provided some great ways to help you find memory-related problems in your applications. Sometimes these tools scare new developers, but they’re actually pretty awesome and easy to use!

That’s what this Instruments tutorial is all about. You’ll get hands hands-on experience using XCode and Instruments to debug and detect memory related problems.

This Instruments tutorial assumes you are familiar with memory management in Objective-C. If you are still shaky on the subject, you may wish to read the memory management tutorial first.

Getting Started

Our goal in this Instruments tutorial is to check for and resolve any memory leaks in an example app that illustrates common memory-related mistakes. So to get started, download a leaky app that I’ve put together for this Instruments tutorial.

Open up the app and run it in XCode. You’ll see a list of sushi in a table view. Try selecting several rows, and then – BOOM! You get the dreaded EXC_BAD_ACCESS error, and the debugger is no help:

The dreaded EXC_BAD_ACCESS

This can be very frustrating to many beginning developers, as it’s not clear where the problem is. Here’s the advice I generally give to developers when you hit an EXC_BAD_ACCESS error:

  1. Set the NSZombieEnabled argument in your executable options, which sometimes helps narrow down the cause
  2. Run with Apple Instruments such as Leaks to look for memory issues
  3. Set a breakpoint in your code and step through until you narrow down where it’s crashing
  4. Tried and true “comment out code till it works” then backtrack from there :]

So let’s try this out for ourselves by trying option #1 – turning on NSZombieEnabled.

Zombie Invasion!

Unfortunately, the NSZombieEnabled option has nothing to do with the zombie apocalypse, so you can put away your boomsticks and chainsaws :]

Sorry, it's not those kind of zombies! Image credit: werewolf from sxc.hu.

Sorry, it's not those kind of zombies!

NSZombieEnabled is a flag that you can enable that will provide a warning when you try to access an object that has been deallocated. And since accessing deallocated memory is one of the most common reasons for crashing, this is a good thing to try first.

To set this up, expand the Executables group in your sidebar in XCode, and double click the PropMemFun executable. Select the Arguments tab, go to the “Variables to be set in the environment” section, and click the Plus button. Set the name of the variable to NSZombieEnabled, and set the value to YES, as follows:

How To Turn On NSZombieEnabled

Now run the app, and click on a few rows again until it crashes. Go to your console log, and you’ll see the following message:

2011-02-03 12:07:44.778 PropMemFun[27224:207] *** 
-[CFString respondsToSelector:]: message sent to deallocated instance ...

The program will also halt on the exact line where it’s crashing now. You can go up the backtrace to find the exact line where it’s crashing by selecting the first area in the backtrace that is your code – in this case tableView:didSelectRowAtIndexPath.

Crash Location found with NSZombieEnabled

Aha! Now you know that in this line, a message is being sent to a deallocated string. This line uses two strings: _lastSushiSelected, and sushiString.

Well sushiString looks OK, because it’s initialized with stringWithFormat (which returns an autorelease variable), so it should be safe to use until the next run loop. But what about _lastSushiSelected?

_lastSushiSelected was set the last time this method was run to sushiString. But sushiString is an autorelease variable, so at some point it will be released, and the memory will be deallocated. But then _lastSushiSelected would still be pointing to deallocated memory! Which explains the problem – sending a message to deallocated memory causes a crash.

So to solve this, we just need to retain _lastSushiSelected so that the memory doesn’t go away. So replace the last line with the following:

_lastSushiSelected = [sushiString retain];

Compile and run your code, and now you should be able to run without crashing!

Build, Analyze, and Recognize

Ok, so we have an app that isn’t crashing – a good first step. But next, we need to start making sure that it isn’t leaking any memory.

There’s an easy way to perform an initial first-glance check on your app to see if it has any memory leaks or other problems – use the built-in Build and Analyze function.

This will make XCode run through your code and look for any mistakes it can automatically detect, and warn you about any potential problems. It doesn’t catch everything, but when it does catch things it’s a really quick and easy way to find out about the problems.

Give it a shot by selecting Build\Build and Analyze. You should see that it detected a memory leak, as you can see below:

Leak found with Build and Analyze

The message says that there’s a potential leak related to the “alertView”. If you look at this line, you’ll see that the UIAlertView was created with a alloc/init (which returns an object with a reference count of 1), but never released! There are several ways to fix this, but one way is to add the following after [alertView show]:

[alertView release];

Go to Build\Build and Analyze again, and you’ll see that there are no remaining issues.

Leaks and Plumbers

Unfortunately, you can’t rely on Build\Build and Analyze to catch everything. There’s one other great automated tool to help you check your app for leaks – the Leaks Instrument.

Let’s try it out. Go to Run\Run with Performance Tool\Leaks, and select a few rows in the table view. Also scroll up and down the table view from the top of the table to the bottom of the table. After bait of experimentation, you should start seeing some leaks popping up in the Leaks tab, which show up as blue bars.

Click the stop button, then go to the toolbar in the middle and click it to change from “Leaked Blocks” to “Call Tree”. In the panel in the lower left, click “Invert Call Tree”, and “Hide System Libraries”. You’ll see that it found two different methods in the code with memory leaks, as you can see below:

Leaks found with Leaks Instrument

If you double click a function name, it will take you directly to the line of code that creates the object that was leaked. This should give you a really good hint where the problem lies, and if you examine the code and think about it a bit, you should be able to figure out what the problem is and fix it.

So why not take a look at the code and see if you can figure out what the problem is and fix it? Once you’ve made a fix, you can run Leaks again and verify that the leak no longer occurs. Come back here once you’ve finished, or gotten stuck!


…waiting…

…waiitng…

…waiting…

Tomato-San is angry!

Tomato-San is angry!

What?! Are you still reading here?! You can do it – go ahead and try! :]